Passenabtrennung

Schnitteile RücketeilJetzt geht es los mit der Konstruktion der Passe. (Ein Klick auf das jeweilige Bild macht es übrigens größer.)

Zuerst nehme ich die beiden Rückenteile, links das mittlere Rückenteil, das im Stoffbruch geschnitten wird, rechts das seitliche Rückenteil. Da meine Schnitte mit Nahtzugabe sind zeichne nicht mir die Nahtlinien ein.

Gestrichelte Linien, 1,5cm von der Kante entfernt, am Halsausschnitt, an den Schulternähten und an der Naht die die beiden Rückenteile verbindet.

(Von der blauen Linie auf dem mittleren Rückenteil bitte nicht verwirren lassen, das war der Beleg einer früheren Version. Als einfach ignorieren.)

This is how the yoke is constructed. (Clicking on a pic shows a bigger version.)

On the picture you see the both parts of the back. On the left the middle back, cut on fold, on the right the side back panel. My patterns do already include the seam allowances, so I have to mark the sewing lines.

Dotted lines, 1,5cm from the edge of the pattern pieces. I’ve marked this in the neckline, the sholder and on the seam that will connect the two (in the end three…) back panels.

(The blue line of the middle back has no meaning here. That’s the facing of another version. So please ignore it.)

Rückenteile zusammengelegtJetzt füge ich die beiden Rückenteile an der Teilungsnaht zusammen.

Man erkennt daß die Teilnungsnaht im oberen Teil gerade ist und an dieser Stelle können die Schnitteile genau aneinander gelegt werden, alsi die Nahtlinien liegen übereinander.

Befestigt werden sie mit Tesafilm.

(Ich verwende Folie für meine Schnitte, deswegen kann ich gut durchsehen und die Teile einfach übereinander legen. Wer mit Papierschnitten arbeitet schneidet die Nahtzugaben einfach ab bzw. arbeitet mit Schnitteilen ohne Nahtzugabe.)

First I’m putting the two back panels together.

You can (hopefully) see that the upper part of the seamline is quite straight, so you can put them precisely next to each other. The seamlines overlap exactely. (More or less….)

Then I’m using clear tape to hold the pattern pieces in place.

(I’m using clear plastic sheet for my patterns, so it is easy to see through and overlap them If you are using paper for your pattern then you have to cot of the seam allowances or use patterns without included seam allowances.)

Schnitteile an Schulter zusammengelegtDie gleiche Prozedur mache ich beim Vorderteil. Mittleres und seitliches Vorderteil werden zusammengeklebt.

Man erkennt vielleicht, daß die vordere Teilungsnaht nur auf einer sehr kurzen Strecke gerade ist und sich somit auch nur auf einer kurzen Strecke überlappen läßt. Das hat zum einen was mit dem Schnitt zu tun, zum anderen aber auch mit meiner Figur, die viel Kurve erfordert.

Anschließen werden Vorderteil und Rückenteil an der Schulternaht zusammengelegt. Dabei beachte ich besonders das Paßzeichen am Halsausschnitt und daß die Naht auch am anderen Ende, also am Armausschnitt genau aufeinander liegt.

Dazwischen ist die Naht etwas gebogen, kann daher nicht exakt aufeinander treffen. Je nach Stärke der Biegung und Schnitt kann man das einfach ignorieren (das habe ich getan) oder am Ende am unteren Rand der Passe wieder durch eine Biegung ausgleichen.

Same procedure for the front. middle front and side front panel are overlapped and taped together.

If you look closely you can maybe see, that on the front the seamlines are only straight for some centimetres, so they can overlap only on that short distance. That is due to the pattern but mostely to my curvy figure. Patterns that do fit me have usually nothing straight…

Now I’m assembling front and back at the shoulder seam. Important here ist that the two seam lines match exactely on the neck side and on the other end an the sleeve side.

Between the seamline is a bit curved, so I cannot match it here.Depending on how strong the curve is you can either ignore it (that’s what I did in this case) or you can add that to the bottom of the yoke, forming a slight curve there.

Sattel zeichnenJetzt kann ich die Passe auch schon zeichnen.

Dank der Folie lege ich einfach eine weitere Schicht Folie über meine zusammengeklebten Teile und zeichne eine Passe.

In meinem Fall geht sie ein kleines Stück ins Vorderteil, nämlich so weit wie die Teilungsnähte aufeinanderliegen, und im Rückenteil habe ich einfach eine gerade Linie von Armausschnitt zu Armausschnitt gezogen. Im 90° Winkel zum Stoffbruch in der hinteren Mitte und genau durch die Stelle verlaufend, bis zu der die Rückenteile genau aneinander liegen.

Wichtig ist die Schulterline einzuzeichnen, denn die braucht man hinterher um Kragen und Ärmel ordentlich einnähen zu können.

Man kann es auch problemlos kürzer machen. (Länger wäre dann schwieriger, geht aber natürlich auch)

Now I can draw the yoke.

I’m just adding another layer of my clear plastic sheet over all the other layers that are taped together. And then I’m drawing the yoke.

In my case the yoke goes only a bit into the front, not further then the matched seam lines. For the back yoke sean I’m drawing a line in an 90° angle to the middlne back. The yoke ends where the seamlines of the back patterns stop to be straight.

Important is to draw the shoulder line, because this will be very helpfull when sewing in the sleeves and sewing on the collar.

A smaller yoke is easily possible. (A bigger one would be more complicated..)

Neues Rückenteil zeichnenNun müssen nur noch die Rückenteile und Seitenteile neu gezeichnet werden.

Eine weitere Schicht Plastikfolie kommt darüber und jetzt zeichne ich die Kontur des alten Schnitteils bis zur Passe nach. Dann kann man die Folie entfernen und ein neues Stück Folie auf das nächste Teil auflegen. Bis man alle vier Teile neu gezeichnet hat. (Meine Teile sind natürlich kürzer als die ursprünglichen Jackenteile, weil ich die Jacke ja gleichzeitig noch kürzer haben möchte.)

An die Passennaht muß dann natürlich noch eine Nahtzugabe angezeichnet werden, auch an der Passe selber natürlich.

Und schon hat man einen Jackenschnitt mit Passe.

Now I only have to remake the front and back patterns.

So I’m adding another layer of plastic and I’m tracing the contour of the side back (that’s the piece I’m showing in the picture) up to the yoke. Then I’, removing that plastic layer, add another piece of plastic foil and trace the next piece until all four pieces are done. (My pattern pieces for front and back are also shorter than the original ones, because I want a shorter jacket.)

Now just adding seam allowances where the front and back pieces meet the yoke. And adding seam allowances to the yoke, of course.

That’s all, the jacket with yoke is done.

Ein Gedanke zu „Passenabtrennung

  1. Pingback: nowaks nähkästchen » Blog Archive » Aus dem Blogarchiv

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.