Grob, lose, weich und knapp – eine Zuschnittherausforderung

Gross, loose, soft and short – a challenge to cut

Vor einigen Jahren habe ich bei Malhia Kent vom Grabbeltisch mal einen wunderschönen Stoff mitgenommen. Ein echtes Reststück mit unregelmäßigen Rändern zu einem Spottpreis. (Ich glaube, es war mit 10 EUR ausgepreist, ich hatte aber noch mehr gekauft und dann noch ein bißchen runtergehandelt.) Von Anfang an hatte ich eine kurze Jacke im Sinn. (Daß es für mehr nicht reicht war auch klar.) Daher soll das der Stoff zu meiner Biker-Stil Jacke werden.

Some years ago I’ve purchased a beautiful fabric at Malhia Kent from the bargain table. A real remnant, with irregularily shaped borders and for like nothing. (I think it had been marked 10 EUR, but I bought some more that day and asked for a discount on the whole purchase.) I had intended a short jacket right away. (It was very clear it would not be enough for more.) So that’s to be my biker-style vest.

Was der Stoff aber nicht hat ist irgendein Halt. Er ist aus unterschiedlichen Fäden und Bändern locker gewoben und läßt sich quasi beliebig verschieben. Und zerfranst schon beim Anschauen. Hier ist schon der Zuschnitt eine echte Herausforderung. Abgesehen davon, daß die Menge für die geplante Jacke wirklich sehr, sehr knapp ist.

What the fabric does not have is any kind of stability. Its woven very loosely from different ribbons and strings and you can pull it any direction you want without ever knowing which might be the right one. And it ravels like hell. So cutting is already a challenge. Which does not get easier by the fact, that the amount of fabric I have is really very, very, very tight for the pattern I want.

Schnitt auf Unterlegstoff gesteckt.

Die Lösung habe ich hier im Unterlegstoff gefunden. (Der ohnehin nötig ist, damit die Jacke irgendeine Form behält.) Der erste Schritt war, das Schnittmuster zu zeichnen bzw. aus einem schon weitgehend passenden Schnitt anzupassen. Ich will Biker Stil. Sieht man ja gerade auch überall, gefällt mir eh und zu dem eleganten Stoff stellt es einen stilistischen Bruch dar, wie ich das gerne mag. Da ich von der Stoffmenge her keinen Spielraum für irgendwas habe, habe ich den Schnitt wirklich minutiös angepasst mit zwei Probeteilen aus Bettbezug und inklusive unterschiedlicher Ärmellängen für meine unterschiedlich langen Arme. (Das ist nicht viel und ich gleiche es sonst über die Nahtzugabe aus, aber hier zählt jeder halbe Zentimeter und die Ärmel bekommen Reißverschluß Schlitze, müssen also unten wirklich exakt abschließen.)

My solution was the underlining. (That is necessary anyhow, to make the vest keep any shape.) First step was drawing/altering the pattern. I want biker style, I trend I like and having the elegant fabric with that pattern is that kind of “dissonance” I like. Since I am quite short of fabric I have no room for any mistake or alteration later so I made two muslins to get it right and even made both sleeves of different lenghts according to my arms. (The difference is small, but here every 5mm count and also I will make zippers in the sleeve vents, so it really has to fit exactely.)

Als Unterlegstoff habe ich eine billige rosa Baumwolle gekauft. Etwas steif, nicht zu fein gewoben, damit die Jacke am Ende (hoffentlich) die richtige Mischung aus “Stand” und “lässig” bekommt. Den Unterlegstoff habe ich gewaschen und gebügelt und genau in den Stoffbruch gelegt. (Die Ränder sind durch die Webekanten etwas wellig, daher habe ich da Abstand gehalten und eben auch nicht die Kanten des Stoffes aufeinander gelegt, sondern darauf geachtet, den Bruch wirklich genau im Fadenlauf zu legen.) Zugeschnitten habe ich mit 1,5cm Nahtzugabe und so exakt wie möglich.

My underlining is a cheap pink cotton. A bit stiff, not fo finely woven and I hope it will give enough shape to achive a good mixture of “enough shape” and “still casual”. I’ve washed and ironed it, of course, and then folding it in half. The selvage is wider than the fabric and gives “ruffles” So I avoid it in cutting and make sure the fabric fold is exactly on the straight grain.) I’ve cut a 1.5 cm seam allowance and tried to precise as possible.

Beschriftung auf StoffDanach habe ich alle Teile auf der linken Stoffseite dünn mit dem Clover Marker beschriftet. Rechtes Teil, linkes Teil… auch alle anderen nötigen Markierungen habe ich auf den Stoff übertragen.

Then I labeled the wrong side of the fabric of each pattern piece, very finely with the Clover fine marker. Right side, left side… and I traced all other necessary marks to the fabric.

Stoff mit Häkelnadel reparierenBevor es weiter ging, mußte ich allerdings den Stoff noch ein wenig reparieren. Vorteil der losen Webung ist, daß das mit der Häkelnadel geht. (Material von der Grabbelkiste halt…)

Before I could continue I had to reweave a ribbon. Advantage of the loose weave is, that a crochet hook can do the task. (Well, it was from the bargain/junk table…)

Schnitteile aufgelegtAnschließend ging das puzzeln los… die Schnitteile aus meinem Unterlegstoff habe ich rechts auf links auf meinen Oberstoff gelegt und rumgeschoben, bis zumindest der unabdingbare Teil untergebracht war. (Eigentlich hätte ich gerne beide mittlere Vorderteile aus dem Stoff zugeschnitten, aber ich habe Kontraststoff für die Belege, notfalls geht auch das.) Da die Teile so die Endgröße haben, kann ich auf Stoß legen. Und ich schneide natürlich in einfacher Stofflage zu, auch das geht einfacher, wenn man jedes einzelne Teil hat.

Then it was jigsaw time… I put all pink pieces with their right side of fabric on the wrong side of my fashon fabric and moved them, until I could at least place all necessary parts. (I would have liked to do both middle fronts from that fabric, but I have a contrasting fabric for the facings and was prepared to use that.) Since I do not have to add seam allowances I can really put the pieces side by side. And I am cutting in single layer, which is easier if you have every single pattern piece.

Anschließend habe ich jedes Teil einzeln festgesteckt, genau auf den Fadenlauf geachtet und dann auf der Nahtzugabe (etwa 7mm von der Stoffkante entfernt) festgeheftet. Dann das nächste Teil stecken und festheften und so weiter….

Then I took one underlining piece, pinned it, double checket the grain, and then handbasted it to the fashin fabric. About 0.7 cm from the border of the fabric, in the midth of the seam allowance. Then I took the next piece, pinned, basted… and so on…

Schnitteile festgeheftet.Und viele, viele, viele Stunden später hatte ich jedes einzelne Teil festgeheftet. Zeitlich habe ich mich selten so verschätzt… ich hatte schon damit gerechnet, daß das zwei, vielleicht drei Stunden dauert. Aber letztlich waren es eher sechs Stunden. Da sich der Stoff extrem gegen sich selber verschiebt, habe ich darauf geachtet, daß er unter jedem Schnitteil glatt liegt, die Teile des Stoffes dazwischen sind teilweise ziemlich wellig. Aber das… ist egal.

And then, many, many hours later, I had each and every pices basted to my fashion fabric. I am not good in guessing time, but here I was wrong as rarely. I had thought it would take me about two hours, maybe three, to do that. In the end it was more six hours. The ribbons in the fabric have no stabiity whatsover, you can push it wherever you want. So I made sure that the fabric under my underlining fabric lays flat. All the ruffles between the pattern pieces… I did not care for.

(Die gute Nachricht? Ich bekam doch auch das zweite mittlere Vorderteil noch drauf. Danach war ich allerdings so genervt, daß ich den Stoff weggefaltet habe und den Zuschnitt erst zwei Tage später gemacht habe.)

(Tha good news? In the end I managed to cut both middle fronts from the fabric. But after all that basting work on the floor I was so bugged that I folded away the fabric and cut it only two days later.)

Das Projekt hat jetzt erst mal Pause, denn ich brauche Reißverschlüsse auf Maß. Und da hat erst die Herstellerfirma Betriebsurlaub, dann hat mein Kurzwarengeschäft Betriebsurlaub, so daß die frühestens Mitte August eintreffen. Aber ich habe ja noch reichlich anderen Stoff zum Verarbeiten…

Now the project is on hold again, because I need the zippers made to my specifications. And now the producer is on holiday, after that the shop where I ordered it is on holiday… so they will not reach me before mid August. But I have sufficiently other fabrics to work with…